Waterproofing Chemicals

Product Details:

We are engaged in offering this product to our clients. Our range of this products is widely appreciated by our clients

Product Details:

We are engaged in offering this product to our clients. Our range of this products is widely appreciated by our clients

Product Details:

Two part epoxy for priming under flooring adhesives and waterproofing membranes. An approved moisture / vapour barrier suitable for direct contact with drinking water. The solvent free composition is compatible with a wide range of coverings including the Bostik Ultraset flooring adhesives and Dampfix waterproofing ranges

Product Details:

Boscocem 475 is a styrene butadiene rubber latex emulsion additive. It is designed for use as an integral bonding agent with cement-based products in slurry bonding coats, mortars, screeds, renders and tile adhesives. It is used to improve adhesion to properly prepared substrates. The tile adhesive so prepared is good for bonding all types of tiles. Uses Cement based toppings, patching mortars, leveling compounds and terrazzo Waterproofing cement/sand renders / screeds Bonding concrete repair mortars Bonding agent for ceramic tiles, bricks, etc. Preparation of spatter dash 

Product Details:

MasterEmaco SBR 2 is a milky-white, Styrene-Butadiene co-polymer latex liquid, produced from styrene and butadiene by high pressure emulsion polymerization with high dispersive properties. When used with cement, concrete and plaster, it reduces the mixing time through high dispersion of the polymer and improves waterproofing, new to old concrete/plaster bonding and strength characteristics and reduces shrinkage and cracking of the mix.

Recommended Uses:

• Concrete repair: Spalled concrete, repairing floors, beams and pre-cast slabs, chajjas etc.
• Bond Coat: For bonding new concrete to old concrete, plaster, stone/brick masonry.
• Plaster repair: For repairing plaster or making water proof plaster which is better than normal plaster.
• Floor screeds and toppings: Abrasion resistant and non-dusting floors.
• Waterproofing: Basements side walls and rafts, lift pits, inspection pits, sunken/overhead water tank, sunken portions of bathrooms and toilets, balconies, chajjas, exposed roofs before finished screed.
• Other typical applications: Bedding tiles, fixing or re-fixing slip bricks.

What are the features and Benefits of MasterEmaco SBR 2 ?

• Multiple applications: Robust product that is economical, easy to handle and store.
• Easy to Mix: Faster mixing to enhance worker efficiency.
• Shrinkage/crack control: High flexural / tensile strength to control cracking.
• Mortar modifier- Improved flexibility, no bleeding, lower water cement ratio and high resistance to water penetration.
• Improves physical/mechanical properties – higher abrasion resistance, good adhesion to building materials similar thermal characteristics to concrete.
• Corrosion control: Prevents corrosion of embedded steel.

• High Dispersion technology: Allows for better workability at slightly reduced water

Product Details:

We are engaged in offering this product to our clients. Our range of this products is widely appreciated by our clients

Product Details:

We are engaged in offering this product to our clients. Our range of this products is widely appreciated by our clients

Product Details:

We are engaged in offering this product to our clients. Our range of this products is widely appreciated by our clients

Product Details:

We are engaged in offering this product to our clients. Our range of this products is widely appreciated by our clients

Product Details:

We are engaged in offering this product to our clients. Our range of this products is widely appreciated by our clients

Product Details:

We are engaged in offering this product to our clients. Our range of this products is widely appreciated by our clients

Product Details:

We are engaged in offering this product to our clients. Our range of this products is widely appreciated by our clients

Product Details:

We are engaged in offering this product to our clients. Our range of this products is widely appreciated by our clients

Product Details:

We are engaged in offering this product to our clients. Our range of this products is widely appreciated by our clients

Product Details:

We are engaged in offering this product to our clients. Our range of this products is widely appreciated by our clients

Product Details:

We are engaged in offering this product to our clients. Our range of this products is widely appreciated by our clients

Product Details:

We are engaged in offering this product to our clients. Our range of this products is widely appreciated by our clients

Product Details:

We are engaged in offering this product to our clients. Our range of this products is widely appreciated by our clients

Product Details:

MasterSeal 550 is a two component acrylic modified cementitious coating applied by brush, roller or trowel to waterproof concrete, masonry.

Product Details:

Description Boscocem 475 is a styrene butadiene rubber latex emulsion additive. It is designed for use as an integral bonding agent with cement-based products in slurry bonding coats, mortars, screeds, renders and tile adhesives. It is used to improve adhesion to properly prepared substrates. The tile adhesive so prepared is good for bonding all types of tiles. Uses Cement based toppings, patching mortars, leveling compounds and terrazzo Waterproofing cement/sand renders / screeds Bonding concrete repair mortars Bonding agent for ceramic tiles, bricks, etc. Preparation of spatter dash Features and Benefits Increases flexural and tensile strength Improves bond strength Improves workability Improves abrasion resistance Reduces shrinkage and cracking Resists chemical and water resistance Protects from freeze-thaw damage Reduces water absorption of mortar

Product Details:

Epoxy grout is renowned for high strength and chemical resistance, making it a versatile solution for a wide range of specialist applications. Unlike other grouts where regular cleaning is necessary, the non-porous nature of epoxy resin does not allow dirt, grime or moisture to penetrate grout joints. 

If your installation is subject to heavy wear or harsh conditions, Bostik epoxy tile grout is an excellent preventative measure, offering tenacious adhesion and stain resistance.

Our epoxy grout is impervious to staining and other forms of chemical or moisture damage. This means it's ideal for:

• kitchens
• bathrooms
• hygiene-sensitive environments like hospitals

Unlike traditional epoxy solutions, our grouts provide great workability while retaining exceptional abrasion resistance and strength. Our epoxy products also have an unlimited shelf life prior to opening.

Product Details:

Boscocem 475 is a styrene butadiene rubber latex emulsion additive. It is designed for use as an integral bonding agent with cement-based products in slurry bonding coats, mortars, screeds, renders and tile adhesives. It is used to improve adhesion to properly prepared substrates. The tile adhesive so prepared is good for bonding all types of tiles. Uses Cement based toppings, patching mortars, leveling compounds and terrazzo Waterproofing cement/sand renders / screeds Bonding concrete repair mortars Bonding agent for ceramic tiles, bricks, etc. Preparation of spatter dash Features and Benefits Increases flexural and tensile strength Improves bond strength Improves workability Improves abrasion resistance Reduces shrinkage and cracking Resists chemical and water resistance Protects from freeze-thaw damage Reduces water absorption of mortar 

Product Details:

Apply to leakage area, remove loose material and clear it properly. Add bostik plug into water in ratio 3:1 by volume. ... Apply on leakage area and hold it with pressure for 2-3 minutes till plug leak hardness. Repeat the above procedure to plug the entire leak

Product Details:

Waterproofing admixture an innovative liquid admixture designed specifically to allow superior workability in concrete/ mortar mixes with reduced water and also achieve high resistance to water ingress. It is based on a specially formulated polymers and compatible with all types of cement and binders. (like fly ash, ground granulated slag, silica fume, metakaolin, etc

Product Details:

We are engaged in offering Fosroc Brushbond - RFX  - 20.088Kg to our clients. Our range of all products is widely appreciated by our clients.

Product Details:

Waterproofing admixture an innovative liquid admixture designed specifically to allow superior workability in concrete/ mortar mixes with reduced water and also achieve high resistance to water ingress. It is based on a specially formulated polymers and compatible with all types of cement and binders. (like fly ash, ground granulated slag, silica fume, metakaolin, etc

Product Details:

SBR Latex is a milky-white, Styrene-Butadiene co-polymer latex liquid, produced from styrene and butadiene by high pressure emulsion polymerization with high dispersive Properties. When used with cement, concrete and plaster, it reduces the mixing time through high dispersion of the polymer and improves waterproofing, new to old concrete / plaster bonding strength. 

Product Details:

Description Boscocem 475 is a styrene butadiene rubber latex emulsion additive. It is designed for use as an integral bonding agent with cement-based products in slurry bonding coats, mortars, screeds, renders and tile adhesives. It is used to improve adhesion to properly prepared substrates. The tile adhesive so prepared is good for bonding all types of tiles. Uses Cement based toppings, patching mortars, leveling compounds and terrazzo Waterproofing cement/sand renders / screeds Bonding concrete repair mortars Bonding agent for ceramic tiles, bricks, etc. Preparation of spatter dash Features and Benefits Increases flexural and tensile strength Improves bond strength Improves workability Improves abrasion resistance Reduces shrinkage and cracking Resists chemical and water resistance Protects from freeze-thaw damage Reduces water absorption of mortar

Product Details:

We are engaged in offering this product to our clients. Our range of this products is widely appreciated by our clients

Product Details:

"Aqua Protection” is a Patnership Firm based entity, headquartered at Chennai, Tamil Nadu with well-equipped facilities of manpower and machineries. Since 1986, it is ardently engrossed in the occupation of Wholesale trading a flawless range of Basf Construction Chemical, MYK Laticrete Construction

Product Details:

ASCOGUARD PRIME is an Industrial grade Permanent Elastomeric Coating Membrane which is used as a unique waterproof membrane and thermal barrier. ASCOGUARD PRIME is an acrylic based, brush/roller applied liquid, which cures to form a seamless rubber membrane specially designed to seal the entire roofs, walls and floors. ASCOGUARD PRIME is a qualified reflective product that will help to reduce building temperatures. ASCOGUARD PRIME offers high tensile strength and elongation, and is virtually undamaged by extended exposure to solar ultraviolet energy.

Old terrace, Roofs, Chajjas, Mosaic Floors, Natural stones etc.

Product Details:

Waterproofing admixture an innovative liquid admixture designed specifically to allow superior workability in concrete/ mortar mixes with reduced water and also achieve high resistance to water ingress. It is based on a specially formulated polymers and compatible with all types of cement and binders. (like fly ash, ground granulated slag, silica fume, metakaolin, etc

Product Details:

Bostik Two in One is a chloride free integral waterproofing cumwater reducing admixture for concrete and plaster. · AREAS OF APPLICATION Concrete roof slabs.

Product Details:

MasterSeal 550 is a two component acrylic modified cementitious coating that requires only on site mixing to form the ideal product to waterproof and resurface concrete, masonry, and most other construction materials. Simply applied by stiff brush, roller, or trowel, it forms a waterproof, flexible coating. MasterSeal 550 provides an effective barrier to waterborne salts and atmospheric gases. Fluid applied, MasterSeal 550 provides a hard wearing, seamless, waterproof membrane.
What is MasterSeal 550 used for?

MasterSeal 550 can be used for the following applications:

 

 

• To reface and even out variations in concrete surfaces.
• As a waterproof lining for water retaining structures.
• For coating seawater channels.
• Sealing and coating tie bar holes to ensure watertightness.
• For waterproofing and protection against brackish water.
• To provide foundation protection.
• As a waterproof coating for roofs.
• As a backing to marble and granite to prevent water ingress and thus alleviate surface staining.
• To provide protection to concrete surfaces from carbonation and chloride attack.
• For use on pedestrian walkways in marine areas.
• For waterproofing of wet areas under tiling.
• As a waterproof and protection coating on top of spray polyurethane foam roof insulation.

Product Details:

Fiberglass mesh is woven by fiberglass yarn and then coated by alkaline resistant latex. It has alkaline resistance, high strength. It is mainly used to reinforce cement, stone, wall materials, roofing. Plastering fiber glass mesh is used for plastering, installation leveling floors, waterproofing.

Product Details:

MasterPel 777 is an innovative liquid admixture designed specifically to allow superior workability in concrete / mortar mixes with reduced water and also achieve high resistance to water ingress. It is based on a specially formulated polymers and compatible with all types of cement and binders (like fly ash, ground granulated slag, silica fume, metakaolin, etc). RECOMMENDED USES MasterPel 777 can be used in all types of concrete and mortar that is used in all types of residential, commercial and infrastructural construction. Additionally, it can be used in concrete applications constantly or intermittently in contact with water such as sea walls, tunnels, basements, structural and pre-cast concrete in exposed superstructures. MasterPel 777 is used as a dual action admixture combining both the waterproofing cum plasticizingeffect for cement concrete, mortars and plasters. 

Product Details:

We are engaged in offering this product to our clients. Our range of this products is widely appreciated by our clients

Product Details:

Mahaguard Terrace coat – SR is a special synthetic resin based waterproofing membrane. It has excellent flexibility and thixotropic nature, itis supplied ready-to-use for cold application. It forms flexible coating, which can be painted over if a light, reflective surface is preferred.

Product Details:

• Long Term Exterior Durability
• Water Based and environment friendly
• UV Resistant
• High Performance Acrylic Elastomeric Coating

Product Details:

We are engaged in offering this product to our clients. Our range of this products is widely appreciated by our clients