Tile and Floor Hardeners

Product Details:

Uses :
Nitoflor Hardtop Standard provide a highly abrasion resistant surface to concrete fl oors by the dry shake-on method which ensures that the hardwearing surface bonds monolithically to the base concrete. They are ideally suited for all industrial areas subject to the heaviest traffi c, e.g. loading bays, trucking lanes, car parks, workshops, machine shops, ramps and spillways.

Advantages :
Supplied ready to use, no additive required Non metallic - does not rust or stain.  Provides a hard, abrasion resistant surface  Forms monolithic bond with base concrete  Easy and economical to apply Description Nitofl or Hardtop Standard is quality controlled, factory blended powder which are ready to use on site. They contain special quartz-silica aggregates which have been selected for abrasion and wear resistant properties as well as shape and size. These latter considerations, together with the use of high performance workability admixtures, produces a material which is easy to trowel into the surface of fresh, wet concrete. Nitofl or Hardtop Standard cure monolithically to provide a dense, non-porous surface which is extremely hardwearing and abrasion resistant. Monolithic cure ensures that problems normally associated with thin ‘granolithic’ screeds, viz., shrinkage, cracking, etc., are completely overcome. Being non-metallic, Nitofl or Hardtop Standard provide a nonslip surface which will never rust and disintegrate

Product Details:

DESCRIPTION:
Sika® Chapdur (IN) is a one part, preblended, coloured mineral dry shake hardener for concrete comprising of cement, specially selected natural mineral aggregates, admixtures and pigments. Sika® Chapdur (IN) provides a extremely hard wearing and abrasion resistant topping for monolithic floors. When sprinkled and trowelled into fresh wet concrete floors, it forms a coloured, dense and wear resistant smooth surface.

USES:
Sika® Chapdur (IN) may only be used by experienced professionals. Suitable for use in all cases where floors are subjected to severe mechanical wear and there is a need to apply special hard wearing surface coverings, such as: ▪ Warehouses ▪ Factories ▪ Shopping malls ▪ Public areas ▪ Restaurants ▪ Museums ▪ Parking lots ▪ Garages and Service stations.

CHARACTERISTICS / ADVANTAGES:
▪ Ready to use ▪ Good wear resistance ▪ High impact resistance ▪ Cost effective surface hardener ▪ Makes floor dust proof ▪ Non metallic and rust free ▪ Easy to clean ▪ Increased resistance to oils and grease ▪ Quality assured factory blending ▪ Suppresses superficial fibres in concrete.

Product Details:

Characteristics /Advantages:
 Easy to use (ready to mix powder) Easy to mix, only add water Adjustable consistency Very good flow characteristics Rapid strength development High final strengths Initial expansion by gas generation Impact- and vibration resistant Non-corrosive Not flammable, non-toxic Shrinkage compensated

Product Details:

Non metallic, monolithic surface hardeningcompound for fresh concrete floor
Uses:

Nitofl or Hardtop Standard provide a highly abrasion resistantsurface to concrete fl oors by the dry shake-on method whichensures that the hardwearing surface bonds monolithicallyto the base concrete. They are ideally suited for all industrialareas subject to the heaviest traffi c, e.g. loading bays, truckinglanes, car parks, workshops, machine shops, ramps andspillways.

Advantages:

Supplied ready to use, no additive requiredNon metallic - does not rust or stain. Provides a hard, abrasion resistant surface Forms monolithic bond with base concrete Easy and economical to apply
Description:
Nitofl or Hardtop Standard is quality controlled, factory blendedpowder which are ready to use on site. They contain specialquartz-silica aggregates which have been selected forabrasion and wear resistant properties as well as shape andsize. These latter considerations, together with the use ofhigh performance workability admixtures, produces a materialwhich is easy to trowel into the surface of fresh, wet concrete.Nitofl or Hardtop Standard cure monolithically to provide adense, non-porous surface which is extremely hardwearingand abrasion resistant. Monolithic cure ensures that problemsnormally associated with thin ‘granolithic’ screeds, viz., shrinkage,cracking, etc., are completely overcome.Being non-metallic, Nitofl or Hardtop Standard provide a nonslipsurface which will never rust and disintegrate.

Product Details:

DESCRIPTION :

Sikafloor® QuartzTop-100 is a pre-mixed, dry-shake surface hardener, which contains hydraulic binder and high concentration of special graded mineral aggregates. Sikafloor® QuartzTop-100 contains pure silica sand. Please note: The Product may only be used by experienced professionals only. USES Sikafloor® QuartzTop-100 is recommended for industrial floors with light to moderate traffic in: ▪ basements and cellars ▪ mechanical workshops ▪ garages for passenger cars ▪ storage rooms ▪ corridors, halls ▪ educational facilities ▪ parking areas ▪ loading platforms.

CHARACTERISTICS / ADVANTAGES :

Sikafloor® QuartzTop-100 offers following advantages: ▪ high abrasion resistance ▪ low level of porosity due to maximum compactness ▪ attractive ▪ easy to clean ▪ limited dust formation.


APPROVALS / STANDARDS:

marking and declaration of performance based on EN 13813:2002 Screed material and floor screeds — Screed material — Properties and requirements — Cementitious screed material.