Fosroc Waterproofing Chemicals

Product Details:

Fuel resistant, low modulus, high joint movement accommodation, tough, twocomponent polysulphide joint sealant

Uses:
Sealing high movement joints in building and civil engineering structures, including superstructures, floors, pavements and subways. Advantages  Forms a tough, elastic, rubber-like seal  Accommodates continuous and pronounced cyclic movement (± 30%)  Adheres to most common substrates  High resistance to ageing reduces physical damage due to climatic extremes  Easy mixing and application Description Thioflex 600 Gun Grade is a two-component joint sealant, based on a liquid polysulphide polymer which, when mixed and applied, cures to form a tough, rubber-like seal. The cured sealant exhibits excellent adhesion to most primed surfaces including concrete, glass, aluminium and stainless steel. Thioflex 600 Gun Grade is ideal for general applications and is packed in a ready-to-mix pack consisting of the base and curing agent in the correct proportions. Thioflex 600 Gun Grade is particularly recommended for use in civil structures, high rise buildings and other applications where access for subsequent maintenance will be difficult and the risk of early movement failure must be minimised. It is also suitable for sealing joints in brickwork, retaining walls, reservoirs, basements and subways.

Application Instructions:
Joint Preparation The joint surfaces must be thoroughly dry, clean and frost free. Remove all dust and laitance by rigorous wire brushing, grinding or grit blasting. Remove all rust, scale and protective lacquers from metal surfaces. Remove any oil or grease with Fosroc Solvent 10. Any expansion joint filler must be checked to ensure it is tightly packed and no gaps or voids exist at the base of the sealing slot before positioning a bond breaker tape. Note: The use of a bond breaker tape is not required in expansion joints containing polyethylene foam joint fillers. For construction or contraction joints polyethylene bond breaker tape or back-up strip must be used. Where a particularly neat finish is required, mask the face edges of the joint before priming and remove immediately after tooling is completed.

Product Details:

High performance elastomeric cementitiouswaterproof coating

Uses:

Brushbond RFX is an high performance elastomeric cementitiouscoating used for waterproofi ng and to protect atmosphericallyexposed reinforced concrete structures from attack byacid gases, chloride ions, oxygen & water. Brushbond RFXis suitable for all types of structures including those in coastalenvironments.The product can be used on concrete, brick and blockwork substratesand is equally suitable for new and existing structures.The product is designed to reface and even out variations inconcrete and masonry surfaces and bridge shrinkage cracks.It provides a seamless, fl exible waterproof coating suitable forwater tanks, reservoirs, drainage culverts basements, roofs,toilets & wet areas. The product provides a tough durable waterresistant coating which can withstand light pedestrian traffi c andalso has excellent weather resistance for exterior applications.
Advantages:
 Excellent barrier to carbon dioxide, chloride and sulphateions. Allows water vapour to escape from the structure. Waterproof-suitable for water retaining structures. High resistance to the eff ect of long-term weathering,durable in all climate conditions including UV attack. Flexible, with thermal expansion similar to concrete. Excellent bond to concrete and masonry. Good crack accommodation capacity. Minimum surface preparation needed and low labourcosts.
Description:
Brushbond RFX is a two component acrylic polymer modifi edcementitious coating which consists of Brushbond RFX powderand Brushbond RFX liquid acrylic emulsion. It requires only theaddition of clean water at site to produce an easily brushablecoating. Brushbond RFX can simply be applied by stiff brush,roller or trowel to obtain the desired thickness.

Product Details:

Uses:Lokfi x S(FS) used for high strength corrosion resistant anchoringof bolts and bars from 12 - 51mm diameter into concrete,rock, masonry or brickwork where high speed of installationand early application of load is required.Permanent installation of reinforcement starter bars, foundationbolts, base plates, balustrading, barriers and safety fences,railway tracks, tie-back anchors, reinforcement dowelling abutments,ground anchors for towers, cranes, dock sills.
Advantages:

 Rapid setting & strength gain Vibration resistant Corrosion resistant Non expansive Can be placed under water
Description:
Lokfi x S(FS) is a fast setting, premeasured, two part fi lledpolyester resin grouts for application at temperatures between8 deg C to 27 deg C.Lokfi x S (Small aggregate)Lokfi x S(FS) is used where the diff erence between the holediameter and bar diameter is < 25mm.Lokfi x S(FS) is used for vertical or horizontal holes where holeand bar relationship conforms to Lokfi x Polyester resin Grout S.

Product Details:

Description Renderoc Plug is supplied as a ready to use blend of dry powders which requires only the addition of clean water at site to produce a highly consistent, rapid setting mortar which is easy to apply in many diffi cult conditions. The material is based on a blend of cements, graded aggregates, special fi llers and chemical additives which control the rate of set and minimise the risk of thermal cracking. 

Product Details:

High performance elastomeric cementitiouswaterproof coating
Uses: 

Brushbond RFX is an high performance elastomeric cementitiouscoating used for waterproofi ng and to protect atmosphericallyexposed reinforced concrete structures from attack byacid gases, chloride ions, oxygen & water. Brushbond RFXis suitable for all types of structures including those in coastalenvironments.
The product can be used on concrete, brick and blockwork substratesand is equally suitable for new and existing structures.The product is designed to reface and even out variations inconcrete and masonry surfaces and bridge shrinkage cracks.It provides a seamless, fl exible waterproof coating suitable forwater tanks, reservoirs, drainage culverts basements, roofs,toilets & wet areas. The product provides a tough durable waterresistant coating which can withstand light pedestrian traffi c andalso has excellent weather resistance for exterior applications.

Additional Information:

• Delivery Time: Immediate Dispatch

Product Details:

MasterSeal 550 is a two component acrylic modified cementitious coating that requires only on site mixing to form the ideal product to waterproof and resurface concrete, masonry, and most other construction materials. Simply applied by stiff brush, roller, or trowel, it forms a waterproof, flexible coating. MasterSeal 550 provides an effective barrier to waterborne salts and atmospheric gases. Fluid applied, MasterSeal 550 provides a hard wearing, seamless, waterproof membrane.
What is MasterSeal 550 used for?

MasterSeal 550 can be used for the following applications:

 

 

• To reface and even out variations in concrete surfaces.
• As a waterproof lining for water retaining structures.
• For coating seawater channels.
• Sealing and coating tie bar holes to ensure watertightness.
• For waterproofing and protection against brackish water.
• To provide foundation protection.
• As a waterproof coating for roofs.
• As a backing to marble and granite to prevent water ingress and thus alleviate surface staining.
• To provide protection to concrete surfaces from carbonation and chloride attack.
• For use on pedestrian walkways in marine areas.
• For waterproofing of wet areas under tiling.
• As a waterproof and protection coating on top of spray polyurethane foam roof insulation.

Product Details:

Uses:

To provide quick, clean, and easy stripping of moulds, andformwork and ensure high quality fair-faced concrete.AdvantagesEnsures easy release, reducing damage and improvingeffi ciency of production Minimizes surface blemishes and staining, promoting highquality fair-faced concrete Reduces opportunity of damage to formwork, extendingusable life Minimizes cleaning of formwork before reuse Suitable for use with all types of formworks such as wood,steel, aluminium, shear wall shuttering and plastic. Protects steel formworks – resist to corrosion
Description:

Reebol Standard is specially formulated blend of mineral oilsand chemicals with water having releasing properties which aresuperior to those of a conventional mould oil. The chemicalsreact with the alkali in the concrete to form a thin water repellentskin on the surface of the mould, thereby enabling easystriping from concrete and acting as a protection to steel andwooden formwork.Reebol Standard is supplied as a white brownish liquid readyfor direct application and use.

Product Details:

High performance elastomeric cementitiouswaterproof coating

Uses:
Brushbond RFX is an high performance elastomeric cementitiouscoating used for waterproofi ng and to protect atmosphericallyexposed reinforced concrete structures from attack byacid gases, chloride ions, oxygen & water. Brushbond RFXis suitable for all types of structures including those in coastalenvironments.

The product can be used on concrete, brick and blockwork substratesand is equally suitable for new and existing structures.The product is designed to reface and even out variations inconcrete and masonry surfaces and bridge shrinkage cracks.It provides a seamless, fl exible waterproof coating suitable forwater tanks, reservoirs, drainage culverts basements, roofs,toilets & wet areas. The product provides a tough durable waterresistant coating which can withstand light pedestrian traffi c andalso has excellent weather resistance for exterior applications.

Description:Brushbond RFX is a two component acrylic polymer modifi edcementitious coating which consists of Brushbond RFX powderand Brushbond RFX liquid acrylic emulsion. It requires only theaddition of clean water at site to produce an easily brushablecoating. Brushbond RFX can simply be applied by stiff brush,roller or trowel to obtain the desired thickness.Technical SupportFosroc off ers technical support service to specifi ers, endusersand contractors, as well as on-site technicalassistance in locations all over the country.

Product Details:

Non metallic, monolithic surface hardeningcompound for fresh concrete floor
Uses:Nitofl or Hardtop Standard provide a highly abrasion resistantsurface to concrete fl oors by the dry shake-on method whichensures that the hardwearing surface bonds monolithicallyto the base concrete. They are ideally suited for all industrialareas subject to the heaviest traffi c, e.g. loading bays, truckinglanes, car parks, workshops, machine shops, ramps andspillways.

Advantages:Supplied ready to use, no additive requiredNon metallic - does not rust or stain. Provides a hard, abrasion resistant surface Forms monolithic bond with base concrete Easy and economical to apply
Non metallic, monolithic surface hardeningcompound for fresh concrete fl oor
Uses:Nitofl or Hardtop Standard provide a highly abrasion resistantsurface to concrete fl oors by the dry shake-on method whichensures that the hardwearing surface bonds monolithicallyto the base concrete. They are ideally suited for all industrialareas subject to the heaviest traffi c, e.g. loading bays, truckinglanes, car parks, workshops, machine shops, ramps andspillways.