Product Details:
| Minimum Order Quantity | 5 Bag |
| Packaging Size | 30 Kg |
| Country of Origin | Made in India |
:
Sika® Chapdur (IN) is a one part, preblended, coloured mineral dry shake hardener for concrete comprising of cement, specially selected natural mineral aggregates, admixtures and pigments. Sika® Chapdur (IN) provides a extremely hard wearing and abrasion resistant topping for monolithic floors. When sprinkled and trowelled into fresh wet concrete floors, it forms a coloured, dense and wear resistant smooth surface.
USES: Sika® Chapdur (IN) may only be used by experienced professionals. Suitable for use in all cases where floors are subjected to severe mechanical wear and there is a need to apply special hard wearing surface coverings, such as: ▪ Warehouses ▪ Factories ▪ Shopping malls ▪ Public areas ▪ Restaurants ▪ Museums ▪ Parking lots ▪ Garages and Service stations.
CHARACTERISTICS / ADVANTAGES :
▪ Ready to use ▪ Good wear resistance ▪ High impact resistance ▪ Cost effective surface hardener ▪ Makes floor dust proof ▪ Non metallic and rust free ▪ Easy to clean ▪ Increased resistance to oils and grease ▪ Quality assured factory blending ▪ Suppresses superficial fibres in concrete.
APPLICATION INSTRUCTIONS SUBSTRATE QUALITY:
▪ The concrete deliveries must be of consistent quality. A concrete slump in the range 75 to 110 mm will normally give best results. ▪ The slab must be of good quality concrete with a minimum water/cement ratio consistent with the production of a fully compacted slab. ▪ The compressive strength must be a minimum of 20 N/mm2. ▪ Use of Sikament® or Sika® Viscocrete® super plasticisers is advised to ensure the optimum quality of concrete and where fibers are used, their optimum dispersion within the mix. ▪ Air Entrained Concrete is not a suitable substrate for the application of dry shake hardeners.
